Drawing Check List

Checked?	Task Description
DWG PRE-SUBMISSION CHECK LIST
NoYesN/A	Can the part be made with stock size material? [Ref 1] [Ref 2] [Ref 3]
NoYesN/A	Each hole size is adequate and the pitch matches company standard. [Reiser]
NoYesN/A	Have you provided enough views to describe the part or assembly? need more pages?
NoYesN/A	Each part in the drawing have material assigned to it. Is it the right material for the application? [help]
NoYesN/A	Have you assigned the correct surface finish via symbol or note? [help 1] [help 2]
NoYesN/A	Each part in the drawing have heat treatment assigned to it (if applicable).
NoYesN/A	Did you indicate GD&T controls and inspection to the most critical features of the part/weldment?
NoYesN/A	Have you considered thermal expansion in the form, fit and function of the part/assembly?
NoYesN/A	If you are indicating the use of a purchased parts: Did you print a full description?
NoYesN/A	Is this purchased part the correct size tolerance? (Over-size, Precise size, Under-size)
NoYesN/A	Is this purchased part the correct material? (e.g. Stainless or Carbon steel )
NoYesN/A	Did you specified a place to etch the part number in the Weldment or Independent Part itself?
NoYesN/A	The words in the title block can be effectively used in a search to locate this drawing.
NoYesN/A	Do all parties involved approve of form and fit of the part/assembly represented in the drawing?

Checked?	Task Description
MANIFOLD PRE-SUBMISSION CHECK LIST
NoYesN/A	Verify that the Customer, Sales Dep. & Engineering Dep. agree on Manifold Outlet Size & Centerline
NoYesN/A	Verify whether the design require single diameter tube/pipe or if diameter reducers are needed
NoYesN/A	Note that flanges less than 0.625 inch thick can warp during welding
NoYesN/A	Note that 1/16 inch wall tube/pipe is readily available and has lower price
NoYesN/A	Verify that flange bolt hole patterns match that of other matting parts
NoYesN/A	Verify if the manifold requires pressure-building bends or other similar features
NoYesN/A	Did you indicate Surface Finish, GD&T controls and Inspection Dimensions to the most critical features of the Manifold?
NoYesN/A	Have you considered thermal expansion in the form, fit and function of the Manifold?
NoYesN/A	Did you specified a place to etch the part number in the Manifold Weldment Drawing?
NoYesN/A	The words in the title block can be effectively used in a search to locate this Manifold.
NoYesN/A	Do all parties involved approve of form and fit of the Manifold represented in the drawing?

DWG PRE-SUBMISSION CHECK LIST